A GE dishwasher in Uniontown, OH stopped turning on completely, even after the homeowner tried resetting the circuit breaker like before. Our diagnosis revealed multiple control system failures requiring replacement of the main control board, user interface, and door wiring harness. The Problem The customer reported that their dishwasher will not turn on at all. … Read more
A GE refrigerator in North Canton was icing over badly in the freezer compartment. The customer’s appliance service company suspected the ice dispenser flap wasn’t sealing properly, allowing air to enter the freezer, but they weren’t equipped for this repair and recommended us. The Problem The refrigerator had a freezer issue with severe frost buildup. … Read more
A GE refrigerator on Beatty Street Northwest in Massillon was losing cold intermittently, forcing the homeowner to unplug it repeatedly or wait for complete defrost cycles. We found the freezer evaporator fan motor had quit, preventing cold air circulation and causing frost buildup on the evaporator. The Problem The customer reported that cold in the … Read more
We recently completed a range repair on East Buchtel in Akron for a customer whose GE stove wouldn’t turn off unless unplugged. Our diagnosis revealed a faulty main control board that needed replacement. The Problem The customer reported that their stove won’t turn off unless they unplug it. This is a clear indication of a … Read more
A GE refrigerator on Morningside Road Southeast in Minerva wasn’t cooling properly in the refrigerator compartment, though the freezer worked fine. After diagnosis, we found this common issue with newer GE French door refrigerators was caused by a failed evaporator fan motor in the fresh food compartment. The Problem The customer reported their GE fridge … Read more
We responded to a call in Minerva, OH for a GE washer that started out not spinning out good and now makes really loud squeaky noise. What we found was a transmission that had failed completely and was leaking oil onto the belt. The Problem The customer reported that their washer started out not spinning … Read more
A customer in New Philadelphia called about their GE dryer with a broken start knob. The knob to start the dryer broke off, making it impossible to start the dryer without the knob. Our technician replaced the start knob and restored normal operation. The Problem The knob to start the dryer broke off. The customer … Read more
A GE refrigerator in Carrollton, OH was freezing product and the digital readout was on zero. When the customer pushed the readout it would disappear, leading them to suspect the thermostat was the culprit. The Problem The refrigerator was freezing product throughout the compartment. The digital readout displayed zero and would disappear when pressed. The … Read more
A customer in Massillon called about their GE refrigerator — the freezer was working but fridge was not. They had tried defrosting the unit as advised, which temporarily restored function, but were told it would need repaired for either a defrost issue or drain issue. The Problem The refrigerator’s freezer compartment was maintaining proper temperature, … Read more
A GE washer and dryer set in North Canton showed serious safety issues during what started as routine maintenance. The dryer had developed a burning smell and sound change, while the washer needed standard upkeep. What we found was a fire hazard that required immediate attention. The Problem The customer reported a burning smell and … Read more