Whirlpool Washer Repair (Model WFW9151YW00) – Carrollton, OH
Washer door was stuck locked with E2/F3 errors. Repaired broken temperature sensor harness and replaced the drain pump to restore normal operation.
Washer door was stuck locked with E2/F3 errors. Repaired broken temperature sensor harness and replaced the drain pump to restore normal operation.
This Whirlpool washer left loads soaking wet due to a stripped drive hub. We replaced the hub and restored spin; a transmission may be needed if it recurs.
The fresh food evaporator fan failed, stopping airflow and leaving the refrigerator near 65 degrees F. Replacing the fan restored proper cooling.
The ice maker filled whenever the water dispenser was used due to a failed water valve diode, creating blocky ice. Replacing the diode restored normal ice production.
The GE dishwasher wasn’t drying dishes. Replacing the float switch and addressing a clogged bottom screen improved drying performance.
Dryer showed an error with red lights. The child safety lock was on; turning it off restored normal drying.
A GE refrigerator kept the freezer cold but the fresh food section was uneven. Replacing the failed refrigerator compartment fan restored airflow and stable temps.
Whirlpool refrigerator GI6SARXXF06 had a seeping water inlet valve that froze the ice maker fill. Replaced the valve and cleared the line to restore ice.
Poor cooling traced to a dislodged evaporator fan blade, and no water due to a failed tank assembly. Replaced the fan blade and water tank to restore both.
Washer wouldn’t finish cycles due to a clogged cold water inlet screen. Cleaning the screen restored proper fill and the cycle now completes.