A Whirlpool washer in Minerva, Ohio stopped filling with water completely. The homeowner called us when their TAWS700EQ2 model wouldn’t start a wash cycle. We found the cold water valve had failed and wasn’t activating when signaled by the control board. The Problem The customer reported their washer won’t fill with water. The machine would … Read more
A Samsung dryer at a home in Minerva, OH was displaying an invalid heating temp information code and running very hot. Our diagnosis revealed the heating element was shorted against the frame, causing the temperature sensor issues. The Problem The customer reported that the information code states invalid heating temp. The dryer runs very hot … Read more
A Frigidaire dryer in Minerva was not heating, leaving clothes damp after full cycles. We diagnosed failed ignition components that prevented the gas burner from lighting properly. The Problem The customer reported their Frigidaire dryer was not heating. Clothes were coming out damp even after extended drying cycles, indicating the gas burner wasn’t igniting. Diagnosis … Read more
A customer in Minerva called about their Amana refrigerator with a freezer that wasn’t freezing well. We found the condenser fan motor had failed, causing the compressor to overheat and operate inefficiently. The Problem The customer reported that the freezer isn’t freezing well. The refrigerator was running but not maintaining proper freezing temperatures in the … Read more
A refrigerator in Minerva, OH wasn’t cooling in the refrigerator compartment, though the freezer fan was working. Our diagnosis revealed a failed defrost thermostat that had gone open, preventing the defrost cycle from completing properly. The Problem The customer reported that the refrigerator section was not cooling, while the fan in the freezer was still … Read more
A customer in Minerva called about her Whirlpool washer not going through all of cycle and dripping water in machine. When we arrived to diagnose the WTW4850XQ0, we cleaned the screens but couldn’t really find anything wrong with the washer. The Problem The washer wasn’t completing its full wash cycle and had water dripping inside … Read more
A Kenmore dryer on Bayard Road in Minerva wouldn’t turn when the customer pressed the start button. Our diagnosis revealed a faulty door switch that prevented the unit from detecting when the door was properly closed. The Problem The customer reported their Kenmore dryer won’t turn. The unit would not respond when attempting to start … Read more
A Kenmore dryer in Minerva, OH would not rotate or heat. Our diagnosis revealed a failed thermal fuse that had shut down the entire system to prevent overheating. The Problem The customer reported their Kenmore dryer would not rotate or heat. The unit was completely non-functional, showing no signs of drum movement or heating element … Read more
A Frigidaire oven in Minerva wasn’t staying lit or sometimes wouldn’t light at all. Our diagnosis revealed a weak bake/broil igniter that needed replacement to restore normal operation. The Problem The customer reported that their oven does not stay lit or sometimes light at all. This type of ignition issue typically prevents the oven from … Read more
A Maytag washer in Minerva wasn’t spinning out water properly during the spin cycle. The customer reported that the spin cycle doesn’t let all the water out. Our diagnosis revealed a failed hub that drives the drum. The Problem The customer contacted us because their washer’s spin cycle doesn’t let all the water out. This … Read more