Maytag Dryer Repair (Model LDG8414AAE) – Leetonia, OH
The dryer was running but not heating, taking about 90 minutes to dry a medium load. Replacing the igniter and gas valve coil packs restored proper heat.
The dryer was running but not heating, taking about 90 minutes to dry a medium load. Replacing the igniter and gas valve coil packs restored proper heat.
Dryer ran hot on all settings due to a heating element shorted to the frame. Replaced the element to restore proper temperature control.
This Whirlpool dryer in Alliance wasn’t heating even though it ran. Replacing a blown high-limit fuse, cycling thermostat, and warped heater restored heat.
The dryer had no heat due to a failed heating element. Installing a new element restored proper cycling and heat.
Dryer had no heat. Replaced the heating element assembly (element, thermal fuse, cycling thermostat) and a worn idler pulley to restore proper drying.
This Amana dryer (NGD5100TQ1) had no heat and the timer wouldn’t advance. Replacing a burned thermal fuse restored proper heating and timer operation.
A Samsung dryer in Minerva, OH produced no heat due to a failed heating element/thermostats. Replacing the heater assembly restored normal drying.
Dryer ran but produced no heat. Replacing a failed timer heat circuit restored proper heating.
The dryer had no heat due to a failed heating element. Replacing the element and a worn idler pulley restored proper heating and operation.
The dryer ran but produced no heat due to an open igniter. Replacing the igniter restored proper heating.