A Kenmore oven in North Canton had two problems: the left front burner wasn’t working and the broiler wouldn’t ignite despite the ignitor glowing. We found the issue was in the harness with surface igniter switches, which needed complete replacement. The Problem The customer reported issues with the left front burner, the small burner. The … Read more
The gas dryer was running but not producing heat. Replacing the heating element and door switch resolved the issue.
The dryer was making a loud screeching sound, which was fixed by replacing the idler pulley and drum roller kit.
The dryer was not functioning properly due to a loose belt. Replacing the idler pulley resolved the issue.
The washer’s agitator was stagnant and the lid wouldn’t stay up. We installed a new thrust bearing and hinges to restore functionality.
The refrigerator was leaking water from the left front side, which was resolved by defrosting ice and clearing the drain.
A coin-operated Whirlpool dryer in North Canton was intermittently failing to start with the push button unless the lever was manually actuated. Our diagnosis revealed a worn push tab on the coin slide that wasn’t properly connecting with the timer mechanism. The Problem The customer reported that their coin-operated dryer intermittently will not start with … Read more
We serviced an LG double oven range on Beechmoor Rd NW in North Canton where both oven lights would not turn off. During our diagnostic visit, we found the lights cycling normally, though the control board may need replacement if the issue returns. The Problem The customer reported that both oven lights on their LG … Read more
A Kenmore washer in North Canton was throwing an oL code at the end of wash cycles and would not complete the final rinse. The machine had been sitting unused for several months, which led to corrosion on a critical component that prevented proper operation. The Problem The customer reported that their Kenmore washer was … Read more
A North Canton customer called us about their Maytag washer making noise and not spinning clothes properly. The clothes were still wet when the cycle finished. Our diagnosis revealed a stripped hub in the spin basket. The Problem The machine was making a noise and not spinning the clothes properly. They were still wet when … Read more