A Fisher & Paykel dryer in North Canton stopped producing heat, leaving clothes damp after full cycles. Our diagnosis revealed a tripped high limit safety switch on the heating element, likely caused by restricted airflow through an undersized exhaust vent. The Problem The customer reported their dryer runs no heat. The unit would complete its … Read more
The washer was making a grinding noise during agitation, which was fixed by adjusting the bent feet that caused the floor to buckle.
The dryer was shutting down with damp clothes inside due to a faulty moisture sensor connection. Reconnecting the sensor resolved the issue.
The dryer was not heating up, which was fixed by replacing the thermal cutoff and the heating element.
The refrigerator failed to restart after a power outage, requiring adjustment of the temperature control. Replacing the cold control thermostat resolved the issue.
We responded to a North Canton home where an LG electric range was taking forever to pre-heat and probably not getting to proper temp. Our diagnosis revealed multiple component failures that would require parts no longer available from LG. The Problem The customer reported their LG range was taking forever to pre-heat and probably not … Read more
We responded to a service call in North Canton for an Admiral refrigerator experiencing temperature variation and freezing issues along with strange noises. The customer reported the unit seemed not to run all the time, which pointed to a potential control system problem. The Problem The customer complained of variation in temperature, variation in freezing, … Read more
A Whirlpool dishwasher in North Canton was experiencing erratic control panel behavior with lights blinking and flashing across multiple buttons. The customer had already tried resetting the power five times, but the touch panel remained unresponsive and displayed confusing light patterns. The Problem The customer reported that lights are blinking on the touch panel. After … Read more
A customer in North Canton called about their Admiral dryer that had power and showed all the normal settings and screens, but when you click start, it just clicks and doesn’t start. We found a broken drive belt that needed replacement. The Problem The dryer has power and shows all the normal settings and screens. … Read more
A Speed Queen commercial dryer at a North Canton laundromat stopped working when the coin slide went in and did not come back out. Our inspection revealed severe lint blockage from shared vent back-drafting and heavy internal corrosion from prolonged moisture exposure that had damaged multiple components. The Problem The customer reported that the dryer … Read more