Whirlpool Dryer Repair (Model WET3300XQ1) – North Canton, OH
The Whirlpool dryer would not start. Replacing the thermal fuse restored normal operation.
The Whirlpool dryer would not start. Replacing the thermal fuse restored normal operation.
Washer lost power and would only run briefly after a reset. Replacing the main control board restored stable operation.
A sock lodged in the blower and a collapsed vent hose choked airflow on this Electrolux dryer. Clearing the sock and installing a new vent pipe fixed it.
Range was non-responsive due to a failed control board. Replaced the board and verified normal heating.
A customer in North Canton called about their LG gas range that wouldn’t heat up. Neither the broiler nor oven would preheat, and both generated an F-9 error code that persisted even after unplugging the unit. We found the main control board had completely failed. The Problem The customer reported that neither the broiler nor … Read more
We recently completed a refrigerator repair in North Canton for a customer whose Admiral refrigerator had water leaking in the bottom of the fridge. Our diagnosis revealed a plugged defrost drain causing the water accumulation. The Problem The customer contacted us about water leaking in the bottom of the fridge. This type of water accumulation … Read more
The GE refrigerator (TBF17DB) lost cooling due to a failed condenser fan. Replacing the condenser fan restored airflow and proper temperatures.
Dishwasher wasn’t getting sufficient water to the upper spray arm due to a clogged food grinder screen. Clearing the screen restored proper cleaning.
Cooling was fine but the freezer evaporator fan was noisy. Replaced the fan assembly with an updated heater-equipped unit to prevent icing and restore quiet operation.
We responded to a Whirlpool freezer repair call in North Canton, OH. The customer reported it’s not freezing, though the lights are on. Sometimes the simplest solutions are the most effective. The Problem The homeowner contacted us because their freezer wasn’t freezing properly. The lights were still on, indicating the unit had power, but the … Read more