A Samsung dryer in North Canton wasn’t producing any heat, leaving clothes damp after full cycles. The centrifugal switch on the motor had failed, preventing the heating circuit from energizing and cutting off all heat production. The Problem The customer reported no heat from their Samsung dryer. Clothes were coming out damp even after running … Read more
A GE refrigerator in North Canton was icing over badly in the freezer compartment. The customer’s appliance service company suspected the ice dispenser flap wasn’t sealing properly, allowing air to enter the freezer, but they weren’t equipped for this repair and recommended us. The Problem The refrigerator had a freezer issue with severe frost buildup. … Read more
Our team visited North Canton to address a Frigidaire refrigerator where the ice maker was not working. After diagnosis, we found both the ice maker assembly and control board needed replacement to restore proper ice production. The Problem The customer reported their ice maker was not working. The unit was completely non-functional with no ice … Read more
A North Canton homeowner called about their Admiral refrigerator ice maker not working properly. The customer had been dealing with water leaking and freezing, requiring hot water treatments to restore function, but now the ice wouldn’t dispense even though it was making ice. Our diagnosis confirmed the auger motor had failed and the ice maker … Read more
A North Canton homeowner called us about their Kenmore dryer that wouldn’t stay closed properly. The door latched, but there was play in the hinge causing the top of the door to come open just enough to stop the dryer and turn on the drum light. The Problem The customer reported that their dryer door … Read more
A North Canton customer called us about a Kenmore washer where the agitator was broken and needed replacement. What started as a loose screw became a bigger problem when a friend tried to superglue it back, causing it to twist off entirely. Our diagnosis revealed much more serious underlying damage. The Problem The agitator was … Read more
A North Canton customer called about their Admiral oven shutting off while preheating. We found the clock/control panel had failed and was cutting power during the heating cycle. The Problem The customer reported that their Admiral oven shuts off while preheating. This made it impossible to cook anything since the oven wouldn’t maintain heat long … Read more
A GE washer and dryer set in North Canton showed serious safety issues during what started as routine maintenance. The dryer had developed a burning smell and sound change, while the washer needed standard upkeep. What we found was a fire hazard that required immediate attention. The Problem The customer reported a burning smell and … Read more
A Whirlpool oven in North Canton wasn’t igniting consistently, leaving the homeowner frustrated with unreliable cooking. Our diagnosis revealed faulty igniter components that needed replacement to restore proper gas ignition. The Problem The customer reported that the oven does not always ignite properly. This intermittent ignition issue made the oven unreliable for daily cooking needs. … Read more
A customer in North Canton called about their Maytag washer that had water pouring out of bottom when filling. Our diagnosis revealed a serious structural issue that required immediate attention to prevent potential water damage. The Problem Water pours out of bottom when filling. The customer noticed water pooling under the washer during the fill … Read more