A Frigidaire refrigerator at a home on Edgewood St SE in North Canton, OH was experiencing a leaking oily yellow liquid from beneath the unit along with an oil smell, and the refrigerator section had climbed to a maximum temperature and would not cool below 44 degrees Fahrenheit. Samuel visited the home and diagnosed the … Read more
A North Canton, OH homeowner on Old Elm Street Northeast was experiencing a recurring issue with their Frigidaire Gallery dishwasher, model FGID2474QF3B, which kept stopping mid-cycle and displaying an i20 error code despite appearing to drain normally. Samuel visited the home, diagnosed a failed pressure sensor switch, and installed the manufacturer service bulletin kit to … Read more
A North Canton, OH homeowner called Louisville Appliance Repair after their Frigidaire dishwasher, model FFBD2403LB0B, stopped draining properly. Samuel visited the home on Reed Avenue Northwest and found broken glass and chunks of food blocking the drain pump and hose. After clearing the obstructions, the dishwasher returned to normal operation. The Problem Water not draining … Read more
A Kenmore washer at a home on Lorrell Avenue Southwest in North Canton, OH was tripping the breaker, particularly during the spin cycle. Samuel visited the home and replaced the timer using part WPW10199989. After the repair, the washer returned to normal operation. The Problem The washer is tripping the breaker. Mostly on spin cycle. … Read more
Louisville Appliance Repair recently completed a service call on Norriton Circle NW in North Canton, OH, for a Kenmore Elite washer, model 110.24032301. The customer reported that something felt loose and the spin cycle was not working correctly. Upon inspection, the wash tub was found to be broken and unavailable, leaving the repair incomplete at … Read more
A Whirlpool dryer (model WED4800BQ1) at a home on Willaman Avenue Northwest in North Canton, OH was not spinning, prompting a service call to Louisville Appliance Repair. Samuel visited the home and found that the thermal fuse had failed, then replaced it along with a new cycling thermostat, heating element, and a dryer repair kit … Read more
A Kenmore oven in North Canton had two problems: the left front burner wasn’t working and the broiler wouldn’t ignite despite the ignitor glowing. We found the issue was in the harness with surface igniter switches, which needed complete replacement. The Problem The customer reported issues with the left front burner, the small burner. The … Read more
The gas dryer was running but not producing heat. Replacing the heating element and door switch resolved the issue.
The dryer was making a loud screeching sound, which was fixed by replacing the idler pulley and drum roller kit.
The dryer was not functioning properly due to a loose belt. Replacing the idler pulley resolved the issue.