We recently serviced an Admiral oven at a home on Georgetown Street NE in Louisville, OH. The customer reported no response on the control panel, with the clock displaying but unable to change or set the oven temperature. Our diagnosis revealed a simple but effective solution. The Problem The homeowner contacted us because their oven’s … Read more
A Canton homeowner called when their Kenmore oven started smoking and multiple functions failed after hearing a buzz from the back of the stove. The fuse block was melted and burnt, leaving only the stovetop and clock working while the oven lights stayed on constantly. The Problem While operating the oven, the customer heard a … Read more
We received a service call from Canton, OH for an LG electric range with one of the glass top burners not working. After diagnosing the unit, we found the oven needed a new control board due to a bad relay. The Problem The customer reported that one of the glass top burners is not working. … Read more
An Admiral oven on Crestdale Street Northeast in Canton, OH had stopped working properly. The customer reported that for a few years only the convection bake option would work, but often times temp would fluctuate and burn, and now all of the bake options will not heat up with only the broil function working. The … Read more
A customer in Sherrodsville, OH contacted us because their Admiral oven needed a new bake element. We diagnosed the issue and provided the replacement part with installation support. The Problem The customer reported their Admiral oven needs oven bake element. The existing heating element had failed and required replacement to restore proper baking function. Diagnosis … Read more
A Canton homeowner called about their LG oven losing temperature after preheating. After pre-heat temp is reached in the oven, the temp is not maintained and drops off. We found a failed ignitor that couldn’t maintain the gas flame needed to hold steady temperatures. The Problem After pre-heat temp is reached in the oven, the … Read more
A North Canton homeowner called us about their Maytag oven that wasn’t heating properly. The oven took 30 minutes to reach 350 degrees, then immediately started cooling down while still showing it was at temperature. A failed bake element was causing the temperature control issues. The Problem The oven was not heating properly nor maintaining … Read more
We recently completed an oven repair for a customer in Massillon whose LG electric range wasn’t heating properly. The oven temperature would not go above 380 degrees, preventing normal cooking and baking. Our diagnosis revealed a failed relay board that controls the heating elements. The Problem The customer reported that the oven temperature does not … Read more
We recently completed an oven repair on Marlboro Avenue Northeast in Alliance, OH. The customer reported that the oven was not maintaining a flame and kept flashing off and on, with gas flow seeming inconsistent. Our diagnosis revealed a failed oven igniter that needed replacement. The Problem The oven was not maintaining a flame and … Read more
A Carrollton customer called about their Frigidaire oven that would not come on. The customer had already installed an igniter and converted to propane previously, so our visit focused on proper adjustment and additional assistance. The Problem The customer reported that their oven will not come on. They had already taken steps to address the … Read more