Samsung Dryer Repair (Model DV42H5000EW/A3) – Alliance, OH
Dryer wouldn’t start and later struggled with full loads due to a misinstalled idler pulley. We fitted the OEM pulley correctly and restored normal operation.
Dryer wouldn’t start and later struggled with full loads due to a misinstalled idler pulley. We fitted the OEM pulley correctly and restored normal operation.
Washer would not drain or spin and made noise. Replaced failed drain pump to restore proper draining and spin.
Refrigerator cooled sporadically due to a failing cold control thermostat. Replaced the thermostat and cooling is now consistent.
The Samsung dishwasher showed flashing Heavy and Smart Auto lights due to a blockage in the case brake water level sensor assembly. Clearing the case brake and sump hose restored normal operation.
A Frigidaire Dryer GLEQ2152ES0 in Alliance, OH was shutting down after a few minutes with flashing lights and an ‘Ad’ message. Replacing the heating element assembly, bearing kit, belt, and idler pulley restored normal operation.
The front-left burner stopped heating due to a corroded wire lead. We installed a new element and repaired the connection.
This Whirlpool dryer in Alliance wasn’t heating even though it ran. Replacing a blown high-limit fuse, cycling thermostat, and warped heater restored heat.
The dryer had no heat due to a failed heating element. Installing a new element restored proper cycling and heat.
The cold control thermostat failed, causing intermittent cooling. Replacing the thermostat restored consistent temperature.
Washer made a loud grinding noise during wash. Replaced the shift actuator and hub to eliminate the noise and restore smooth operation.