Samuel Willhite A Whirlpool washer in North Canton was making grinding noises and wouldn’t finish its cycle. When we opened it up, we found the transmission bearings were completely shot and oil was leaking everywhere underneath. The Problem The customer reported their washer makes grinding noises and doesn’t seem to finish the cycle. These symptoms pointed to … Read more
A Kenmore refrigerator in North Canton was making a loud noise from the fan in the back of the fridge. Our diagnosis revealed the condenser fan had failed, and the cold control thermostat was also out of spec. The Problem The customer reported that the fan in the back of the fridge was making a … Read more
A Samsung oven in Massillon wouldn’t ignite, leaving the homeowner without a working cooking appliance. Our diagnosis revealed a failed hot surface ignitor — a common failure point on gas ovens that prevents the safety valve from opening to release gas for combustion. The Problem The customer reported that their oven will not ignite. This … Read more
A Whirlpool washer in Canal Fulton was showing a PF error and the door would lock on start but wouldn’t reopen. After checking everything over, we determined the unit appeared okay and recommended having an electrician address potential breaker issues. The Problem The customer reported that their Whirlpool washer door locks on start and won’t … Read more
A Whirlpool washer at Edison Street NE in Alliance wasn’t draining properly after another repair company had already replaced the water valve. Our diagnosis revealed the real problem: a failing drain pump that was humming but not moving water. The Problem The customer reported that their wash machine will not work. Another repairman came out … Read more
A GE dishwasher in Uniontown, OH had power but no display on the unit. We found the main control board and user interface had failed, requiring replacement of multiple electrical components to restore full operation. The Problem The customer reported having power to the dishwasher but no display on the unit. The dishwasher appeared to … Read more
A customer in Alliance called about their GE washer leaking with water on the floor. Our diagnostic inspection revealed the leak was coming from the dispenser area, with water valve and drawer assembly issues identified. The Problem The customer reported leaking with the floor getting wet around their GE washer. Water was pooling on the … Read more
A North Canton homeowner called when their GE washer filled with water but would not agitate or spin and was not draining. We found the unit full of water with a drain pump that was activating but not actually pumping water out. The Problem The customer reported that their washer fills with water but will … Read more
A customer in Atwater called about their LG range having issues with one burner that shuts off by itself or won’t shut off. Our diagnosis revealed a relay board that was sporadically failing, making the unit unreliable for safe cooking. The Problem The customer reported that one burner shuts off by itself or won’t shut … Read more
A Whirlpool refrigerator in Alliance, OH had both fridge and freezer lights that quit working. Our technician found the refrigerator light could be replaced, but the freezer light required additional work after the initial repair. The Problem The customer reported that their fridge and freezer light quit working. Both interior lights had stopped functioning, leaving … Read more