Bosch Dishwasher Repair (Model SHP65T55UC/07) – Deerfield, OH
The dishwasher displayed a heat element 9 error code, which was resolved by replacing the heating element and pump assembly.
The dishwasher displayed a heat element 9 error code, which was resolved by replacing the heating element and pump assembly.
The washer stopped draining due to a faulty pump. Replacing the drain pump restored its functionality.
The washer was very loud during the spin cycle, with squeaking and metal rubbing sounds. Replacing the tub bearings and mode shifter assembly resolved the issue.
The washer’s spin cycle was failing, leaving clothes heavy with water. A loose drive belt was replaced to restore proper function.
The right front burner was only functioning on high, causing cooking difficulties. Replacing the burner switch resolved the issue.
The refrigerator stopped working after a power outage, but the freezer continued to function. Replacing the damper assembly motor resolved the issue.
The washer displayed an OE error and failed to drain, preventing it from completing cycles. The water pump was replaced to resolve the issue.
A Whirlpool refrigerator in Minerva, Ohio wasn’t cooling properly. Our initial diagnosis pointed to a bad temperature control, which we replaced to restore proper cooling operation. The Problem The customer reported that their Whirlpool refrigerator wasn’t cooling properly. This is a common complaint that can stem from several components in the cooling system. Diagnosis During … Read more
We responded to a Canton home where an Admiral stove had stopped heating properly. The customer reported that both baking and broil elements wouldn’t heat, leaving them without a working oven. Our diagnosis revealed a failed clock/control board that needed replacement. The Problem The homeowner contacted us because their baking and broil elements won’t heat. … Read more
A Samsung dryer at a home on Greenlawn Avenue in Akron stopped working after making a loud bang. The customer reported it was working fine until that moment, then it wouldn’t start at all. We found failed components that needed replacement to get the unit running again. The Problem The dryer won’t turn on. It … Read more