Whirlpool Dishwasher Repair (Model WDT910SAYE3) – Dalton, OH
The dishwasher was not draining properly, but after clearing a broken knife blade from the drain pump, the issue was resolved.
The dishwasher was not draining properly, but after clearing a broken knife blade from the drain pump, the issue was resolved.
A homeowner needed a new microwave installed and requested the old one be removed. The replacement was successfully completed.
The dishwasher wouldn’t start despite the control panel lighting up. A reset didn’t resolve the issue, but it was successfully repaired.
The dishwasher was not draining properly, which was resolved by replacing the drain pump supplied by the customer.
The refrigerator was not cooling while the freezer remained fine, with a constant temperature of 54°. The fresh food fan was replaced to resolve the issue.
The washer was not spinning out water properly, leaving clothes very wet. The issue was resolved by replacing the hub.
The washer was reported out of order, but no issues were found during diagnostics. It worked consistently during testing.
The dishwasher was unable to drain water after completing its cycles. The issue was resolved by cleaning the plugged drain hose.
The refrigerator wasn’t cooling due to a frosted panel in the freezer. Replaced the jazz board and defrost thermostat to restore functionality.
The washer was spinning violently and loudly, displaying a chronic F or H warning. Replacing shocks and fixing a broken wire resolved the issue.