Samuel recently made an in-home service call on Chase Rd SE in Carrollton, OH to take a look at a Maytag dishwasher, model MDB8959SFZ4, that would not start, though the lights came on and water had collected inside. After resetting the connections and cycling the breaker, the dishwasher started working again with no parts needed. … Read more
A Samsung dishwasher at a home on Canter St NW in Massillon, OH was leaking water onto the floor due to cracked rubber stripping along the bottom of the door. Samuel visited the home and adjusted the vent, then ran a cleaner through the machine to address lime buildup. The repair was completed on March … Read more
A Thor dishwasher at a home on Johnstown Road Northeast in Dover, OH needed mounting brackets to complete the job. Louisville Appliance Repair technician Samuel visited the address to handle the repair on the HDW2401SS model. Part number 12276000001840 was used to get the work done. The Problem Needs mounting brackets The Repair (no repair … Read more
A Samsung dishwasher on Franklin Place NW in Canton was beeping and not draining after a sink backup. When we arrived, we found water had accumulated in the leak pan underneath the unit, triggering the safety sensors. The Problem The customer reported their dishwasher was beeping and not draining after sink backup. The unit had … Read more
When a Massillon, OH homeowner on Spindle St NW noticed their Maytag dishwasher leaking, they called Louisville Appliance Repair for an in-home evaluation. Samuel visited the address, tightened the hose connection to the water valve, and later confirmed on a follow-up visit that no active leak was present. With the customer planning to replace the … Read more
The dishwasher turned on but wouldn’t run. Replaced the drain pump and upgraded the pressure sensor to restore functionality.
The dishwasher failed to drain properly, but after clearing the plugged drain, it was restored to full functionality.
The dishwasher was leaking water onto the floor and not draining properly. A splash guard was installed to resolve the issue.
The dishwasher was not draining, leaving standing water after cycles. Replacing the solenoid and timer resolved the issue.
The dishwasher was not filling properly and would stop shortly after starting. Replacing the washer pump resolved the issue.