Whirlpool Dryer Repair (Model LGR4634JQ2) – Alliance, OH
The dryer was running but not heating. After replacing the heater coil valves, idler pulley, and drum support wheel, it started heating properly.
The dryer was running but not heating. After replacing the heater coil valves, idler pulley, and drum support wheel, it started heating properly.
The refrigerator was not cooling properly, even at the highest setting. Replacing the temperature control resolved the issue.
Water was leaking down the back wall inside the refrigerator, affecting shelves and bins. The issue was resolved by defrosting the freezer and installing a heat probe.
The washer was making a grrr sound and failing to spin out water. The issue was resolved by replacing the motor coupling.
The dryer was not heating, indicating a recurring issue that needed attention. The timer was replaced, and a new terminal was installed on the wire.
The dishwasher wouldn’t drain properly, but after clearing a blockage in the disposer, it started functioning again.
The dishwasher was leaking, causing water damage to the flooring and ceiling. Replacing the washer pump and door gasket resolved the issue.
The oven failed to heat up due to a burnt wire connection. Replacing the terminal block and connectors resolved the issue.
The washer displayed a SUD error during the rinse cycle, preventing it from washing clothes. The issue was likely due to excessive soap usage or failing bearings.
The temperature dial on this GE dryer stopped functioning, causing inconvenience. Replacing the cracked timer knob restored its operation.