A Kenmore refrigerator in Winton wasn’t making ice — just producing a grinding noise from the ice maker. We diagnosed a failed ice maker assembly and completed the repair with a drop-shipped replacement part. The Problem The customer reported their ice maker doesn’t work and just makes a grinding noise. The unit had stopped producing … Read more
A customer in Louisville called about their Kenmore dryer that sometimes doesn’t start and other times shuts off halfway through the cycle. When we diagnosed the unit, we found it only had one leg of power coming to it. The Problem The dryer was experiencing intermittent operation issues. Sometimes it wouldn’t start at all, and … Read more
A customer in Massillon called about their Kenmore Coldspot refrigerator’s ice bin release that was broken. The spacesaver door ice bin needed to be removed and replaced with a new bin and crusher assembly. The Problem The spacesaver door ice bin release was broken on this Kenmore Coldspot refrigerator. The customer needed the broken old … Read more
A Kenmore dryer on Deacon Avenue Northwest in North Canton wasn’t advancing through its timer cycles properly. The customer reported the timer is not advancing, but our diagnosis revealed the real culprit was severely restricted airflow causing the unit to stop prematurely in auto cycles. The Problem The customer reported that the timer is not … Read more
A Kenmore Cold Spot refrigerator in Detroit, OH had an ice maker that wouldn’t dump ice despite producing it normally. After diagnosing the unit, we determined the ice maker mechanism had failed and shipped a replacement icemaker to restore full functionality. The Problem The customer reported their Kenmore Cold Spot fridge ice maker has ice … Read more
A Kenmore washer on Edison Street in Alliance, OH was leaking water when it spins out and rumbling loudly while spinning. Our diagnosis revealed the bearings had failed, causing water to leak onto the floor during the spin cycle. The Problem The customer reported their Kenmore washer was leaking water when it spins out and … Read more
In Canton, a Kenmore washer filled but wouldn’t advance or drain due to a failed lid switch. Replacing the lid switch restored normal operation.
Kenmore refrigerator showed ER RF error and clicking due to a failed evaporator fan. Replacing the evaporator fan and cover assembly restored cooling.
Washer stopped agitating due to a stripped agitator hub. Replaced the agitator assembly and ran calibration; normal washing restored.
A Canton homeowner called us about their Kenmore range overheating despite already replacing the temperature sensor. We found visible damage to the main control board and an F10 error code indicating the real culprit behind the persistent overheating issue. The Problem The customer reported their oven was overheating and running too hot. They had already … Read more