A Kenmore Cold Spot refrigerator in Detroit, OH had an ice maker that wouldn’t dump ice despite producing it normally. After diagnosing the unit, we determined the ice maker mechanism had failed and shipped a replacement icemaker to restore full functionality. The Problem The customer reported their Kenmore Cold Spot fridge ice maker has ice … Read more
A Kenmore washer on Edison Street in Alliance, OH was leaking water when it spins out and rumbling loudly while spinning. Our diagnosis revealed the bearings had failed, causing water to leak onto the floor during the spin cycle. The Problem The customer reported their Kenmore washer was leaking water when it spins out and … Read more
In Canton, a Kenmore washer filled but wouldn’t advance or drain due to a failed lid switch. Replacing the lid switch restored normal operation.
Kenmore refrigerator showed ER RF error and clicking due to a failed evaporator fan. Replacing the evaporator fan and cover assembly restored cooling.
Washer stopped agitating due to a stripped agitator hub. Replaced the agitator assembly and ran calibration; normal washing restored.
A Canton homeowner called us about their Kenmore range overheating despite already replacing the temperature sensor. We found visible damage to the main control board and an F10 error code indicating the real culprit behind the persistent overheating issue. The Problem The customer reported their oven was overheating and running too hot. They had already … Read more
A Kenmore gas dryer on Woodside Avenue Southeast in North Canton wasn’t spinning when turned on, though the drum spun freely when off and the motor sounded normal. The customer suspected a belt issue, and that’s exactly what we found during our service call. The Problem The drum doesn’t spin when I turn the dryer … Read more
A Kenmore washer on Opal Street in Louisville wasn’t completing its wash cycle. The machine filled with water but wouldn’t run the cycle. Our diagnosis revealed a failed lid switch preventing normal operation. The Problem The customer reported their washer filled with water but the cycle would not run. The machine was stuck after the … Read more
A Kenmore oven in Carrollton wouldn’t preheat despite the igniter lighting up. The homeowner could see the igniter glowing, but the oven never reached temperature. Our diagnosis revealed a failing igniter that wasn’t drawing enough current to open the gas valve. The Problem The customer reported that it seems like the oven lights but it … Read more
We returned to a home on Hayne Road in Akron for a Kenmore refrigerator ice maker that quit making ice again. The customer mentioned we had fixed this same issue last year on October 10th, 2018. After checking our records and inspecting the appliance, we found the water valve had failed once more. The Problem … Read more