Kenmore Washer Repair (Model 110.20702991) – Canton, OH
The washer stopped during the rinse cycle and wouldn’t restart. The issue was resolved by resetting the tripped GFI on the plug.
The washer stopped during the rinse cycle and wouldn’t restart. The issue was resolved by resetting the tripped GFI on the plug.
The washer wouldn’t drain properly, but it was quickly fixed and is now functioning well.
The refrigerator’s ice maker and water valve were replaced to restore functionality.
The washer was jumping around during cycles, which was fixed by installing a new suspension rod assembly.
The dryer wouldn’t start despite the timer running. The issue was a broken belt caused by a tight idler pulley.
Ice buildup in the freezer was resolved by clearing a plugged defrost drain and installing an extension on the defrost heater.
The dryer was making a screeching noise, which was resolved by replacing the idler pulley and cleaning out lint buildup.
A Canton homeowner called about their Kenmore refrigerator not cooling. Our diagnostic revealed the cold control needs replacement, with a generic option currently available for this older model. The Problem The customer reported their refrigerator was not cooling properly. This is a common complaint that can stem from several different components in the cooling system. … Read more
The ice maker was leaking water along with the ice, leading to a messy situation. Replacing the ice maker resolved the issue, but a water valve is still needed.
Water pooling in the produce drawers was resolved by cleaning ice from the freezer and installing a heat probe into the drain.