Kenmore Dryer Repair (Model 110.64972300) – Louisville, OH
The dryer wouldn’t start despite the timer running. The issue was a broken belt caused by a tight idler pulley.
The dryer wouldn’t start despite the timer running. The issue was a broken belt caused by a tight idler pulley.
Ice buildup in the freezer was resolved by clearing a plugged defrost drain and installing an extension on the defrost heater.
The dryer was making a screeching noise, which was resolved by replacing the idler pulley and cleaning out lint buildup.
A Canton homeowner called about their Kenmore refrigerator not cooling. Our diagnostic revealed the cold control needs replacement, with a generic option currently available for this older model. The Problem The customer reported their refrigerator was not cooling properly. This is a common complaint that can stem from several different components in the cooling system. … Read more
The ice maker was leaking water along with the ice, leading to a messy situation. Replacing the ice maker resolved the issue, but a water valve is still needed.
Water pooling in the produce drawers was resolved by cleaning ice from the freezer and installing a heat probe into the drain.
The dryer was not heating up, causing frustration for the homeowner. After replacing several components, it now functions properly.
The washer filled with water but stopped mid-cycle. Replacing the lid switch resolved the issue.
A Canton homeowner called about their Kenmore refrigerator running constantly. When we arrived at the 39th Street SW location, our diagnosis revealed the refrigerator was low on Freon, causing the compressor to work overtime trying to maintain proper temperatures. The Problem The customer reported their fridge runs constantly. This type of issue typically indicates the … Read more
A Kenmore dryer at a Salem, OH home wouldn’t start when the owner pushed the start button, even though it tumbled and heated fine otherwise. Our diagnosis revealed failed components in the start circuit that were preventing normal operation. The Problem The customer reported that their dryer will not start when push start button. Otherwise … Read more