Samsung Dryer Repair (Model DV42H5000EW/A3) – Alliance, OH
Dryer wouldn’t start and later struggled with full loads due to a misinstalled idler pulley. We fitted the OEM pulley correctly and restored normal operation.
Dryer wouldn’t start and later struggled with full loads due to a misinstalled idler pulley. We fitted the OEM pulley correctly and restored normal operation.
We completed an ice maker repair on a Samsung refrigerator on Pinecrest Street Northeast in Canton, OH. The customer called because their refrigerator was not making ice. Our diagnosis found the ice maker wasn’t cycling properly and needed complete replacement. The Problem The customer reported their Samsung refrigerator was not making ice. The ice maker … Read more
We received a service call from a homeowner in Canton, OH reporting their Samsung refrigerator’s ice maker making a pulsating humming noise and not producing ice. Our diagnosis revealed the ice maker assembly had failed and needed complete replacement. The Problem The customer contacted us because their refrigerator’s ice maker was making a pulsating humming … Read more
We recently serviced a Samsung refrigerator on Stratavon Drive Northwest in North Canton, OH that had completely lost cooling in both compartments. The customer reported loud buzzing noise from the bottom rear, with the unit running about 10 minutes before buzzing loudly and shutting down, plus excessive heat at the top of the freezer that … Read more
The Samsung dishwasher showed flashing Heavy and Smart Auto lights due to a blockage in the case brake water level sensor assembly. Clearing the case brake and sump hose restored normal operation.
A Samsung refrigerator in Canton, OH had an ice maker that was totally non functional after making grinding sounds and completely stopping ice production. Our technician found the ice maker assembly had failed and required a complete replacement with an updated kit. The Problem The customer reported their ice maker is totally non functional. It … Read more
Dryer had no heat. Replaced the heating element assembly (element, thermal fuse, cycling thermostat) and a worn idler pulley to restore proper drying.
The refrigerator section stopped cooling while the freezer worked. Replaced the fridge evaporator cover (with new fan and sensor), cleared and updated the defrost drain and heat probe.
Washer was stuck in drain and couldn’t change cycles. Replacing the pressure switch and running calibration restored normal operation.
A Samsung dryer in North Canton wasn’t heating up, leaving clothes damp after full cycles. Our diagnosis revealed a failed high limit thermostat on the blower housing — a safety component that shuts off heat when temperatures get too high. The Problem The customer reported that their electric dryer was not heating. The drum would … Read more