Whirlpool Refrigerator Repair (Model ED5FVGXSS03) – Alliance, OH
Refrigerator cooled sporadically due to a failing cold control thermostat. Replaced the thermostat and cooling is now consistent.
Refrigerator cooled sporadically due to a failing cold control thermostat. Replaced the thermostat and cooling is now consistent.
The Samsung dishwasher showed flashing Heavy and Smart Auto lights due to a blockage in the case brake water level sensor assembly. Clearing the case brake and sump hose restored normal operation.
A Frigidaire Dryer GLEQ2152ES0 in Alliance, OH was shutting down after a few minutes with flashing lights and an ‘Ad’ message. Replacing the heating element assembly, bearing kit, belt, and idler pulley restored normal operation.
The front-left burner stopped heating due to a corroded wire lead. We installed a new element and repaired the connection.
This Whirlpool dryer in Alliance wasn’t heating even though it ran. Replacing a blown high-limit fuse, cycling thermostat, and warped heater restored heat.
The dryer had no heat due to a failed heating element. Installing a new element restored proper cycling and heat.
The cold control thermostat failed, causing intermittent cooling. Replacing the thermostat restored consistent temperature.
Washer made a loud grinding noise during wash. Replaced the shift actuator and hub to eliminate the noise and restore smooth operation.
The Whirlpool dishwasher was not cleaning due to a clogged middle spray arm. We cleared the blockage and restored proper spray and wash performance.
The washer was faulting from oversized loads and a stretched, slipping drive belt. We replaced the belt and advised proper 2/3-full loading.