A KitchenAid dishwasher on Northview Ave in Alliance wasn’t filling with water despite all buttons working normally. We found a piece of plastic lodged under the float switch that was preventing the fill cycle from starting. The Problem The customer reported that all buttons work, but dishwasher will not fill with water. The unit would … Read more
A homeowner in Alliance called about their Kenmore dishwasher making a loud noise while running. We found some plastic chunks in pump chopper/screen that were causing the noise issue. The Problem The customer reported their dishwasher was making a loud noise while running. This type of noise typically indicates something is interfering with the wash … Read more
Louisville Appliance Repair handled a dishwasher installation on Knox-School Road in Alliance, OH. The customer needed a new dishwasher installed after purchasing the unit themselves. We completed the full installation and disposed of their old appliance. The Problem The customer contacted us because they needed a new dishwasher installed. They had already purchased the Admiral … Read more
A customer in Alliance called about their Kenmore washer that becomes off-balanced no matter how small the load. Even with just one towel, the washer still becomes unbalanced with a deafening sound and moves forward. Our diagnosis revealed multiple failed components that made replacement the better option. The Problem The washer becomes off-balanced, no matter … Read more
A customer in Alliance called about their LG washer that had the cold hose spraying out the back when trying to connect. When we arrived, we discovered the washer wouldn’t start, which prevented us from seeing where it was leaking. The Problem The customer reported that the cold hose sprays out the back when trying … Read more
A customer in Alliance called about their LG washer only delivering hot water instead of cold. What looked like a major repair turned out to be a simple plumbing mix-up that we sorted out in minutes. The Problem The customer reported they weren’t getting cold water to wash with and were only getting hot water … Read more
A Maytag dryer at a home on Noble Street in Alliance wouldn’t start when the customer tried to use it. Our inspection revealed the lint filter was broken and had sucked up a sock, jamming the blower completely. The Problem The customer reported their Maytag dryer won’t start. The unit showed no response when they … Read more
We received a call from Alliance, OH about a Frigidaire Affinity dryer that was shutting off after 2/3 minutes and not drying, with error code E68 displaying. Our diagnosis revealed a failed control board with a stuck button that would have been too costly to repair for this older unit. The Problem The customer reported … Read more
A Samsung washer in Alliance wouldn’t drain, leaving water sitting in the drum after each cycle. We found the drain filter completely blocked with debris, preventing proper water flow during the drain cycle. The Problem The water won’t drain. The customer reported water remaining in the washer drum after cycles completed, making it impossible to … Read more
A Samsung VRT washer in Alliance, OH was displaying a DC error code and refusing to complete its spin cycle. The machine would start to spin water out, then start beeping and flashing “DC” on the display before recycling and filling with water again. This turned out to be a model covered by Samsung’s recall … Read more