Frigidaire Dryer Repair (Model AEQ6700FS0) – Louisville, OH
Dryer squeaked and underheated due to an open heating element and worn drum bearing. Replaced element and bearing kit to restore heat and quiet operation.
Dryer squeaked and underheated due to an open heating element and worn drum bearing. Replaced element and bearing kit to restore heat and quiet operation.
Washer door wouldn’t close due to a broken door striker and damage at the hinge/outer panel. Replaced striker, hinge, and outer door panel to restore proper latching.
The refrigerator stopped making ice due to a non-cycling ice maker. Replacing the ice maker restored normal ice production.
Dryer ran but produced no heat. Replacing the failed heating element restored proper drying.
Whirlpool stove had stripped valve stems causing two burners to not shut off reliably. Replaced the front valve manifold (all four valves) to restore control.
The oven heated unevenly due to weak igniters. Replaced the main oven burner igniters; ignition now in ~45 seconds and preheat in about 8 minutes.
The Whirlpool dryer was set up for natural gas while the home uses propane. We installed an LP conversion kit and calibrated burner settings for safe, efficient heat.
The oven on this Frigidaire range wouldn’t heat due to a failed bake element. We confirmed 240V and replaced the element to restore baking.
The start relay failed, so the compressor wouldn’t start. Replacing the relay restored proper cooling and temperature control.
Dishwasher powered on but wouldn’t start. Main control board had 120V but no response; replacing the control restored normal operation.