Admiral Washer Repair (Model WA42T26GW1) – North Canton, OH
Washer lost power and would only run briefly after a reset. Replacing the main control board restored stable operation.
Washer lost power and would only run briefly after a reset. Replacing the main control board restored stable operation.
An Amana dryer in Carrollton had loud drum noise from a worn idler pulley and support rollers. Replacing the idler and both rollers restored quiet operation.
A sock lodged in the blower and a collapsed vent hose choked airflow on this Electrolux dryer. Clearing the sock and installing a new vent pipe fixed it.
Dishwasher wouldn’t fill, leaving cycles stalled. Replaced the main control board to restore proper water fill and operation.
The washer would not spin because the drain pump failed and the tub couldn’t empty. Replacing the drain pump restored proper draining and spin.
Dishwasher didn’t spray from the mid or top arms and made a grinding/humming noise. Replacing the wash pump restored full spray and normal sound.
The upper oven on a dual Kenmore wall unit was completely unresponsive. A tripped thermal fuse was reset, restoring normal operation.
Two surface burners on this GE range in Canton stopped heating due to failed elements and worn receptacles. Replaced both elements and burner plugs.
The dryer’s heating element failed. Replacing the element restored proper heat and normal drying performance.
Range was non-responsive due to a failed control board. Replaced the board and verified normal heating.