We responded to a washer repair call in Canton, Ohio for an Admiral washer that wouldn’t dispense water to start the cycle. The customer reported the cycle would count down but no washing was happening. Our diagnosis revealed an E56 error code pointing to a failed speed control board. The Problem The water will not … Read more
The oven heated unevenly due to weak igniters. Replaced the main oven burner igniters; ignition now in ~45 seconds and preheat in about 8 minutes.
The large burner on this GE range was heating poorly. Testing found the burner thermostat open; replacing the burner restored full, even heat.
The dryer developed loud tumbling noises from a frayed belt, worn idler/rollers, and a rock in the glides. Replacing those parts and clearing debris restored quiet operation.
Broiler appeared inoperative. Verified normal operation and showed correct broil settings; no parts needed.
A GE refrigerator in Canton, OH wasn’t maintaining proper temperatures — the fridge compartment wouldn’t go below 50 degrees. Our diagnosis revealed a failed fresh food recirculation fan and a plugged defrost drain that needed immediate attention. The Problem The customer reported that the temp in fridge won’t go below 50 degrees. This temperature issue … Read more
LG washer in Canton showed an OE drain error and wouldn’t rinse due to a failed drain pump. Replaced the pump; washer now drains and completes cycles.
We responded to a service call in Canton, OH for a GE washer that wasn’t completing wash cycles. The machine was not draining or spinning, leaving clothes soaked at the end of what should have been a complete wash. Our diagnosis revealed a failed drain pump assembly that needed replacement. The Problem The customer reported … Read more
Washer would not spin or agitate and made a grinding noise. Replaced oil-contaminated belt and both pulleys; unit tested good and normal cycles restored.
Washer wouldn’t power on despite a working outlet. A failed lid switch was replaced, restoring normal power and operation.