A Whirlpool dishwasher on Greenford Ave SW in Massillon wouldn’t start when the customer pushed the button, even though all other buttons worked and lit up. Sometimes it would start, but the behavior was inconsistent. We found the main control board had failed. The Problem The customer reported that the dishwasher won’t start when they … Read more
A customer on Hogan Way Northwest in Canton called about their Admiral dishwasher not cleaning well after just moving in. When we arrived, we found this was a case where proper operating instructions were needed rather than a mechanical repair. The Problem The customer reported their dishwasher was not cleaning well. They had just moved … Read more
We responded to a service call in Leetonia for an LG dishwasher that was tripping the breaker shortly after the cycle started. The customer had already installed a GFCI outlet after noticing the original outlet appeared burned, but the unit was still tripping after about one minute of operation. The Problem The dishwasher would trip … Read more
A Louisville homeowner contacted us about their Whirlpool dishwasher leaking water out from under the toe kick. After inspection, we found the sump assembly had failed, causing water to leak onto the kitchen floor during wash cycles. The Problem The customer reported leaking water out from under the toe kick. This type of leak typically … Read more
The dishwasher control panel lit up, but it wasn’t functioning. Replacing the control board resolved the issue.
A Kenmore dishwasher at a home on Rochester Road in Minerva, OH wasn’t heating water during wash or dry cycles. The control board had stored a heat circuit error code that was causing the heating element to shut down. The Problem The customer reported no heat during wash or dry cycle. Dishes weren’t getting properly … Read more
A Canton homeowner called about their LG dishwasher not draining properly. When we arrived at the Swepstone Street Northwest address, we discovered the issue wasn’t with the dishwasher itself but with how it had been installed. The Problem The customer reported their dishwasher was not draining properly. Water was remaining in the bottom of the … Read more
A customer in Alliance called about their Maytag dishwasher making unusual sounds and not cleaning properly. They could hear water sloshing during wash and weren’t getting water from the top spinner arm to rinse dishes. Our diagnostic found the dishwasher was actually working fine. The Problem The customer reported hearing water sloshing during wash and … Read more
A Canton homeowner called about water leaking from the float area of their Whirlpool dishwasher. We checked the float housing components but couldn’t replicate the leak during our visit. The Problem The customer reported leaking water from float area on their Whirlpool dishwasher model WDT970SAHW0. Diagnosis Water leaking from float housing. Unable to replicate. Happened … Read more
A Uniontown homeowner contacted us about standing water in the bottom of their Whirlpool dishwasher. They suspected a clog but weren’t certain of the cause. Our diagnosis confirmed their hunch — we found an obstruction blocking the drain hose. The Problem There was standing water in the bottom of the dishwasher. The customer guessed it … Read more