Samsung Microwave Repair (Model Sams) – Louisville, OH
A homeowner needed a new microwave installed and requested the old one be removed. The replacement was successfully completed.
A homeowner needed a new microwave installed and requested the old one be removed. The replacement was successfully completed.
The dishwasher was unable to drain water after completing its cycles. The issue was resolved by cleaning the plugged drain hose.
A homeowner faced a problem with jeans stuck in the agitator, which was resolved by removing the jeans and running a calibration.
The dishwasher failed to start despite having power. The control board was replaced to restore functionality.
The refrigerator wasn’t cooling properly, with the bottom drawer icy while the rest remained warm. Replacing the evaporator fan resolved the issue.
A Louisville homeowner called about their Kenmore refrigerator with a freezer that still wasn’t freezing food properly. We found the refrigerator components operating correctly, but discovered frost buildup around the door that suggested it had been left open. The Problem The customer reported their freezer still not freezing food. This was clearly an ongoing issue … Read more
A commercial laundry facility on North Chapel Street in Louisville called us back for a persistent Admiral T300 washer that was still not starting up, plus a dryer making clicking noises near the igniter. After our previous visit, the washer was still giving them trouble and the dryer had developed ignition issues. The Problem The … Read more
We recently serviced an Admiral oven at a home on Georgetown Street NE in Louisville, OH. The customer reported no response on the control panel, with the clock displaying but unable to change or set the oven temperature. Our diagnosis revealed a simple but effective solution. The Problem The homeowner contacted us because their oven’s … Read more
A coin operated washer at a rental property on Fairlawn Avenue in Louisville had developed a loud knocking sound during the spin cycle, and the agitator arm had stopped spinning entirely. The customer had already replaced the agitator dogs but the problem persisted, indicating a deeper mechanical failure in the drive system. The Problem The … Read more
A commercial dryer at Zwick’s Hair Salon in Louisville was making rubbing and grinding sounds during operation. Our diagnosis revealed worn front bearings that needed immediate replacement to prevent further damage to the drum assembly. The Problem The salon reported their Maytag dryer was producing rubbing sounds and grinding sounds during cycles. These symptoms indicated … Read more