A commercial laundry facility in Louisville called us about multiple equipment failures affecting their operation. The Dexter stack dryer number 1 wasn’t heating again after a previous repair, and a Wascomat unit with an out-of-order tag kept running after our last visit and was stuck during the cycle and wouldn’t shut off. The Problem The … Read more
We got a call from Maplegrove Street in Louisville for a Samsung top-load washer that was beeping during cycles and refusing to finish loads. The customer thought maybe the suspension springs were going bad, but when we opened it up, the problem was sitting right at the water supply — completely clogged inlet screens. The … Read more
A Frigidaire refrigerator on Northlawn Avenue Northeast in Louisville wasn’t making ice, though it dispensed water fine. Our diagnosis revealed multiple issues with the icemaker system that made repair inadvisable. The Problem The customer reported no ice production from their Frigidaire refrigerator. Water dispensing worked normally, but the icemaker had stopped functioning entirely. Diagnosis We … Read more
A Louisville homeowner called about their Frigidaire range oven not heating correctly. We diagnosed the unit and found it needs a bake element at minimum, but couldn’t remove it from the counter to fully test. The customer decided to proceed with purchasing a new unit instead. The Problem The customer reported their oven not heating … Read more
A Louisville homeowner called when their Estate washer was full of water and didn’t work at all. We found the lid switch had failed, leaving the washer stuck after filling with no wash, drain, or spin cycles. The Problem The customer reported their washer was full of water and doesn’t work at all. The machine … Read more
The dishwasher failed to start despite having power. The control board was replaced to restore functionality.
The refrigerator wasn’t cooling properly, with the bottom drawer icy and the rest warm. Replacing the evaporator fan resolved the issue.
The front left burner was stuck on high, but replacing the infinite switch resolved the issue.
The KitchenAid stove had a non-working burner, and the exhaust hood needed new light bulbs. Both issues were resolved during the service.
The washer was slow to drain and hesitant to cycle, leading to a clogged pump issue. The repair involved replacing the shift actuator and cleaning inlet screens.