Samsung Washer Repair (Model WA40J3000AW/A2) – Louisville, OH
Washer wouldn’t fill. Replacing the cold water inlet valve restored normal filling.
Washer wouldn’t fill. Replacing the cold water inlet valve restored normal filling.
Dryer would only run when the dial was held and shut off at random. Replacing a failed timer restored consistent, hands-free operation.
Dryer squeaked and underheated due to an open heating element and worn drum bearing. Replaced element and bearing kit to restore heat and quiet operation.
Washer door wouldn’t close due to a broken door striker and damage at the hinge/outer panel. Replaced striker, hinge, and outer door panel to restore proper latching.
The refrigerator stopped making ice due to a non-cycling ice maker. Replacing the ice maker restored normal ice production.
Washer went out of balance during spin. We found weak shocks and a worn drive hub; recommended shock kit and hub replacement, but customer chose a new unit.
The stove would not power up or feed pellets due to a failed control potentiometer interface. We installed a new control board and cleared an auger jam, restoring normal operation.
Plugged into 220V, this refrigerator would not power on. Diagnosis found a fried inverter board; advised inverter board replacement under warranty.
Washer lid would not lock and water dripped into the tub when off. Replaced a failed lid switch and a faulty water inlet valve to restore normal use.
Dryer powered on but wouldn’t start. A failed door switch was replaced to restore operation.