A customer in Massillon called about their LG washer that had water sitting on the bottom and wouldn’t spin. When we arrived, the water was gone and the machine did spin in diagnostic mode, but we needed to find what was causing the intermittent problem. The Problem The customer reported that water sat on bottom … Read more
We recently completed a washer repair on Arrowhead Drive Southwest in Dellroy, OH. The customer’s Maytag washer wasn’t spinning properly, leaving clothes soaked at the end of each cycle. Our diagnosis revealed a failed shift actuator that needed replacement. The Problem The customer reported that the spin cycle doesn’t work and clothes are still soaked … Read more
A Speed Queen washer on Teepee Drive in Minerva, OH stopped working with loud noise and water leaking everywhere. The homeowner called when their top-load washer became completely inoperable. We found a sock had been sucked up in the drain pump and shattered it. The Problem The customer reported their Speed Queen washer stopped working, … Read more
A Whirlpool washer in Canton, OH had its top half of agitator come off during use. Our technician found the agitator cam assembly had failed, requiring a complete repair kit installation to restore proper washing action. The Problem The customer reported that the top half of agitator came off their Whirlpool washer. This left the … Read more
A Maytag washer in Atwater, OH would not turn on at all. Our diagnostic work revealed a failed auto water sensor that was preventing the machine from starting its cycle. The Problem The customer reported their washer will not turn on. No lights, no response when pressing buttons, and no indication of power despite being … Read more
A customer in Massillon called about their Whirlpool washer that wouldn’t fill with water properly. The machine was only putting in a tiny amount then starting to wash. Our diagnosis revealed a water valve issue that we resolved without replacing any parts. The Problem The washer wouldn’t fill with water normally. It was only putting … Read more
A Whirlpool Cabrio washer in Akron stopped mid-cycle and displayed error code F7 E6. The machine would turn off and on but wouldn’t finish the cycle or start a new one. We found a stuck actuator that needed replacement. The Problem The customer reported that the washer stopped mid cycle and displayed error code F7 … Read more
A Maytag washer in East Liverpool wasn’t draining completely and stopped part way through the spin cycle. When we arrived for the scheduled service call, we could not replicate the problem the customer described. The Problem The customer reported their Maytag A512 washer won’t drain completely and stops part way through the spin cycle. This … Read more