Kenmore Washer Repair (Model 417.48102700) – Alliance, OH
The washer was beeping continuously and wouldn’t shut off, requiring a breaker reset. A new control board was installed to resolve the issue.
The washer was beeping continuously and wouldn’t shut off, requiring a breaker reset. A new control board was installed to resolve the issue.
The washer wouldn’t spin due to a sensor issue, but broken wires on the motor were repaired to restore functionality.
The washer was stuck on the spin cycle and displaying a UL code. Replacing the bearing kit and rotor resolved the issue.
The washer was spinning but not draining properly. Replaced the lid lock and installed a new drain hose to resolve the issue.
The washer had a filter and pump issue, but after replacing the pump, it was tested and is now functioning properly.
The washer was not draining and cold water was not entering. The pump and inlet valve were replaced to resolve the issue.
Louisville Appliance Repair recently completed a service call in North Canton, OH, where a Kenmore washer (model 110.27082603) was throwing an oL code at the end of the wash cycle and would not complete the final rinse. Samuel visited the home on Rose Lane Street Southwest and found that the drum shaft had corroded after … Read more
Louisville Appliance Repair recently completed a service call on W. Main St. in Malvern, OH, where a Samsung washer, model WF365BTBGWR/A2-01, was not filling with water and would not finish its cycles. Samuel visited the home, checked the valves and screens, and pulled the drain hose out of the wall drain, after which the washer … Read more
A North Canton, OH household on Orchard Avenue Northeast was dealing with a Maytag washer (model MVWX600BW0) that was making noise and leaving clothes soaking wet at the end of each cycle. Samuel visited the home and found that the hub in the spin basket had stripped, requiring a replacement hub part. After the repair … Read more
The washer was making a grrr sound and failing to spin out water. The issue was resolved by replacing the motor coupling.