We responded to a washer repair call in Canton, Ohio for an Admiral washer that wouldn’t dispense water to start the cycle. The customer reported the cycle would count down but no washing was happening. Our diagnosis revealed an E56 error code pointing to a failed speed control board. The Problem The water will not … Read more
Whirlpool washer WFW70HEBW0 was taking too long to finish. Cleared a clean-cycle error and secured a loose pressure hose rubbing the rotor to restore normal cycles.
Washer went out of balance during spin. We found weak shocks and a worn drive hub; recommended shock kit and hub replacement, but customer chose a new unit.
Washer lid would not lock and water dripped into the tub when off. Replaced a failed lid switch and a faulty water inlet valve to restore normal use.
LG washer in Canton showed an OE drain error and wouldn’t rinse due to a failed drain pump. Replaced the pump; washer now drains and completes cycles.
We responded to a service call in Canton, OH for a GE washer that wasn’t completing wash cycles. The machine was not draining or spinning, leaving clothes soaked at the end of what should have been a complete wash. Our diagnosis revealed a failed drain pump assembly that needed replacement. The Problem The customer reported … Read more
Washer wouldn’t drain or spin due to a failed lid switch. Replaced the lid switch; draining and spinning restored.
Washer would not spin or agitate and made a grinding noise. Replaced oil-contaminated belt and both pulleys; unit tested good and normal cycles restored.
Washer wouldn’t power on despite a working outlet. A failed lid switch was replaced, restoring normal power and operation.
We received a call about an Amana washer not getting water in Mechanicstown, OH. The customer suspected it probably needed a fill valve. When we arrived, we found the machine had one stored error code for the lock error, but the lid lock was functioning properly. The Problem The customer reported their Amana washer was … Read more