A Samsung washer at 412 5th Street in Louisville wasn’t finishing its cycle properly. After diagnosing the issue, we found the screen was plugged on the cold water valve, restricting water flow and preventing normal operation. The Problem The customer reported their Samsung washer was not finishing the cycle. The machine would start but wouldn’t … Read more
We responded to a service call in Alliance, OH for an LG washer that was heavily leaking out the front during wash cycles. The customer had already checked the filter, suspecting a bad seal or similar issue. Our diagnosis revealed a disconnected hose that was causing the washer to overflow. The Problem The customer reported … Read more
A Kenmore washer on Groton Street Northwest in Canton, OH wouldn’t start because the button that is pushed down by the lid was broken and rusted. We found the lid switch had failed, preventing the washer from detecting when the lid was properly closed. The Problem The customer reported that the button that is pushed … Read more
A customer in North Canton called about their Maytag washer that had water pouring out of bottom when filling. Our diagnosis revealed a serious structural issue that required immediate attention to prevent potential water damage. The Problem Water pours out of bottom when filling. The customer noticed water pooling under the washer during the fill … Read more
A Whirlpool washer in Alliance, OH had an issue the customer said they “really can’t explain it you would just have to see for yourself.” After diagnosing the unit, we found multiple motor-related failures that made replacement the more economical choice. The Problem The customer contacted us about their Whirlpool washer with symptoms they couldn’t … Read more
We recently completed a washer repair in North Canton for an LG front-load washer making noise while draining. The customer reported that cycles and spins worked fine, but the draining process had become excessively loud. Our diagnosis revealed a broken wash circulation pump — an uncommon failure that was causing both the noise and pumping … Read more
A Maytag washer in Canton, OH stopped responding entirely when the homeowner tried to start a load. The washer will not turn on at all. Our diagnosis revealed a failed user interface that needed complete replacement. The Problem The customer reported that their washer will not turn on. No lights, no response to button presses, … Read more
We responded to a service call in Uniontown, OH for an LG washer that must be unplugged and plugged back in to start. When we arrived at the Glenshire Circle location, the unit was working while we were there, suggesting an intermittent electrical issue that may require a new control board. The Problem The customer … Read more
A Whirlpool washer in Alliance, OH wasn’t responding when the start button was pressed. The machine wouldn’t start at all, leaving the customer without a working washer. We found the dispenser actuator was stuck, preventing the wash cycle from beginning. The Problem When the start button was pressed, the machine wouldn’t start. The washer showed … Read more
An Admiral washer in Canton, OH wouldn’t power on or wash, with no lights in the display. When we diagnosed the unit, we found the user interface had failed completely. The Problem The customer reported their washer won’t power on or wash. No lights in display showed any activity when they tried to start a … Read more