On a service call along Homeworth Road in Alliance, OH, Samuel found a Whirlpool gas range that was failing to light consistently and struggling to reach baking temperature. The culprit was a weak bake igniter drawing below the current needed to open the gas valve reliably. After replacing the igniter, the oven lit within 30 … Read more
On a service call to Louisville, OH, Samuel found a Whirlpool gas range with an oven that wouldn’t heat. The bake igniter had failed, drawing only 2.5 amps instead of the required 3.2 to 3.6, and a replacement igniter had the oven back in service the same visit. The Problem Gas oven is not heating … Read more
On a service call to Duquette Ave NE in Hartville, OH, Samuel Willhite evaluated a Whirlpool propane range (model WEG745H0FS0) that had been producing tall orange flames and heavy soot for roughly two years. After pressure testing and inspecting all burners, the range itself checked out fine. The issue traced back to the upstream propane … Read more
We responded to a call on Lombardi Ave SW in Canton, OH for a Whirlpool range that was displaying defective signals and nearly caused a coffeecake to catch fire. After testing both elements and finding them functional, we determined the main control board had failed and recommended unit replacement. The Problem The customer reported that … Read more
We responded to a service call on Leonard Avenue Southwest in Massillon, OH for a Whirlpool gas range with intermittent ignition issues. The customer reported that the gas oven sometimes ignites but often does not relight, with the problem becoming noticeable after a recent move. Our diagnosis revealed a failed igniter that needed replacement. The … Read more
A Whirlpool range in East Canton was displaying error code F2 E1 and experiencing control lockups that required disconnecting power to shut off the oven. Our diagnosis revealed a stuck cancel button on the user interface causing the malfunction. The Problem The customer reported error code F2 E1 with the oven not functioning properly. Controls … Read more
A Whirlpool range in East Rochester, OH wasn’t heating in the oven while the surface burners worked fine. The customer suspected the bake heating element, but we found something different entirely. The Problem The customer reported that the oven stopped heating last night. Surface burners were working normally, and the display and clock functioned properly. … Read more
The oven wouldn’t ignite or hold temperature. Replacing the bake igniter restored reliable ignition and proper preheat performance.
A Whirlpool range on Begonia Circle Northwest in Mogadore was shutting down with a “fan too low” error message shortly after the oven ignited. Our diagnosis revealed a failed cooking fan that wasn’t moving enough air to satisfy the unit’s safety sensors. The Problem The customer reported the oven would ignite and start heating but … Read more
A Charleston Drive homeowner in Akron called about their 5-6 year old Whirlpool range with burner control issues. Two burner knobs weren’t turning off properly and felt stripped when turning. Our diagnosis revealed stripped valve stems in the front manifold assembly. The Problem Two burner knobs and shafts were stripped or not turning off properly. … Read more