A Canton homeowner called about their Whirlpool dryer making loud squeaking noises during operation. When we arrived at the West Boulevard Northwest location, the noise was clearly coming from worn drum support components that needed immediate replacement. The Problem When the dryer is running it squeaks loud. This type of noise typically indicates worn rollers, … Read more
Dishwasher didn’t spray from the mid or top arms and made a grinding/humming noise. Replacing the wash pump restored full spray and normal sound.
The dryer’s heating element failed. Replacing the element restored proper heat and normal drying performance.
A Whirlpool dryer in Carrollton, OH was very noisy due to worn support rollers and an idler pulley. Replacing the rollers, idler, and belt restored quiet operation.
A failing drive motor caused loud noise and a burnt electrical odor. Replacing the drive motor restored smooth, quiet operation.
A Whirlpool range on Begonia Circle Northwest in Mogadore was shutting down with a “fan too low” error message shortly after the oven ignited. Our diagnosis revealed a failed cooking fan that wasn’t moving enough air to satisfy the unit’s safety sensors. The Problem The customer reported the oven would ignite and start heating but … Read more
A Whirlpool washer on Plain Center Avenue Northeast in Canton, OH was going from sensing to done without draining. We found a broken lower harness to the drain pump that was triggering an F8E1 error. The Problem The customer reported that their washer goes from sensing to done and will not drain. The cycle would … Read more
A Louisville homeowner called about their Whirlpool oven that wouldn’t hold temperature and had ignition problems. The temperature seemed to fluctuate or not heat up at all, and sometimes the igniter would glow but not ignite the flames. Our diagnosis revealed a failed bake ignitor that needed replacement. The Problem The customer reported that their … Read more
We recently completed a dryer repair on Parkview Street NW in Canton, OH for a customer experiencing extended dry time. Our diagnosis revealed no heat and a failed timer that was preventing proper cycle operation. The Problem The customer reported extended dry time with their Whirlpool dryer. Clothes were taking much longer than normal to … Read more
We responded to a service call in Alliance, OH for a Whirlpool washer that won’t rinse and now won’t go into wash cycle. What we discovered was a transmission failure that was leaking water internally. The Problem The customer reported their Whirlpool washer won’t rinse and now won’t go into wash cycle. The unit had … Read more