Frigidaire Refrigerator Repair (Model FFHT2126LB3) – Alliance, OH
The refrigerator was not cooling in the fridge compartment due to a failed defrost thermostat. Replacing it restored proper cooling.
The refrigerator was not cooling in the fridge compartment due to a failed defrost thermostat. Replacing it restored proper cooling.
The GE dryer was making excessive noise during operation, but after replacing the front bearing slides, it’s now running smoothly.
The dryer drum was turning, but there was no heat. Replacing the igniter resolved the issue, restoring proper function.
The dryer was screeching and noisy, requiring a new rear support roller to restore quiet operation.
The oven ignitor was weak, causing the oven not to heat. After replacing the ignitor, the oven is now cycling correctly.
The dishwasher displayed an I20 code and would not operate. We replaced the pressure sensor to restore functionality.
The top oven wasn’t reaching temperature, but after replacing the burnt baking element and control panel, it now heats properly.
The dishwasher wasn’t cleaning effectively and left water spots. The issue was resolved by fixing the top spray arm’s position.
The washer wouldn’t spin and displayed a ‘sensing load’ error. After replacing the actuator and cleaning the inlet filter, it now runs smoothly.
Water puddles were forming daily in front of the fridge. The defrost drain was cleared and ice was removed from the freezer.