Samuel Willhite A Samsung dryer in North Canton stopped working when the drum wouldn’t turn. We diagnosed a failed drive motor and replaced it to restore full operation. The Problem The customer reported that the drum won’t turn. The dryer would start but the clothes wouldn’t tumble, making it impossible to dry loads properly. Diagnosis Testing revealed … Read more
We responded to a service call in Alliance, OH for an Admiral refrigerator that wasn’t freezing properly. The customer explained their freezer won’t freeze and it’s located in the garage where they use it for extra meat storage and cookouts. The Problem The customer reported that their refrigerator was working but the freezer won’t freeze. … Read more
A Kenmore oven in North Canton wasn’t reaching proper temperature despite running for over an hour. The homeowner reported it would get warm but couldn’t hit 400 degrees and stayed stuck on preheat. Our diagnosis revealed a failing igniter that wasn’t generating enough heat to properly light the gas burner. The Problem The customer called … Read more
We responded to a service call on Spangler Street Northeast in Canton, OH for an Admiral oven that would not ignite. Our diagnosis revealed a bad bake relay on the control board, which was preventing the ignition system from functioning properly. The Problem The customer reported that their oven would not ignite. The unit was … Read more
The dryer was running but not heating. Replacing the failed igniter resolved the issue.
The dryer drum wouldn’t spin due to a blockage caused by a sock. After clearing the blower and replacing the grill, it now operates correctly.
The dryer was making a heavy squeaky noise, which was resolved by replacing the idler pulley.
The handle on the dishwasher broke, preventing it from opening. Replacing the door latch resolved the issue.
The oven displayed an F2 error and only the top coil worked, heating dangerously fast. Replacing the control board resolved the issue.
The oven failed to ignite, causing no preheating. Replacing the weak bake igniter resolved the issue.