Samuel Willhite A Maytag dryer in Alliance, OH wasn’t heating and drying properly, though it spun fine. We found the heating element had failed completely and replaced it with a new one. The Problem The customer reported their Maytag dryer won’t heat and dry. The drum spins fine, but clothes come out damp after a full cycle. … Read more
A Louisville homeowner contacted us about their Whirlpool dishwasher leaking water out from under the toe kick. After inspection, we found the sump assembly had failed, causing water to leak onto the kitchen floor during wash cycles. The Problem The customer reported leaking water out from under the toe kick. This type of leak typically … Read more
A customer on Gephart Avenue in Louisville called about their Whirlpool dryer with a door latch broken. Our technician found the catch had failed, preventing the door from securing properly and the dryer from starting. The Problem The customer reported the door latch broken on their Whirlpool dryer model WED4815EW1. This prevented the door from … Read more
A customer on 18th St NW in Canton called with a Whirlpool washer that wasn’t draining. We found a failed water pump that needed replacement to restore proper drainage function. The Problem The customer reported their Whirlpool washer was not draining. Water would remain in the tub at the end of wash cycles, preventing clothes … Read more
A Whirlpool refrigerator on Paris Ave N E in Paris, OH wasn’t producing ice after being reconnected following five years of storage. The ice maker previously worked, but stopped after the refrigerator door was left open for most of a day, then the unit sat unplugged for years before being recently restarted. The Problem The … Read more
The fridge wasn’t cooling and showed an SY EF error code. Replacing the evaporator fan motor restored normal operation.
The dryer was making a bad noise with heavy loads due to a failed support roller. Replacing all support rollers and the idler pulley resolved the issue.
The refrigerator was leaking water from the ice maker and not cooling properly. Replacing the user interface resolved the issues.
The oven failed to heat, and the stove-top had ignition issues. Replacing the igniter and cleaning the burners resolved the problem.
The Whirlpool gas range malfunctioned after an LP conversion, but adjustments to the burners and regulator resolved the issue.