Samsung Dryer Repair (Model DV45K6200EW/A3) – Hartville, OH
The dryer was excessively noisy due to worn drum support rollers and a failing idler pulley. Replacing all four rollers and the idler restored quiet operation.
The dryer was excessively noisy due to worn drum support rollers and a failing idler pulley. Replacing all four rollers and the idler restored quiet operation.
The dryer developed a startup squeak from worn support components. Replacing the idler pulley, drum rollers, and belt restored quiet, reliable operation.
Dryer ran but produced no heat. Replacing a failed timer heat circuit restored proper heating.
Washer was leaking around the motor/transmission area and the dryer knob was missing. We replaced the transmission, motor, tub assembly, and control knob.
Washer door was stuck locked with E2/F3 errors. Repaired broken temperature sensor harness and replaced the drain pump to restore normal operation.
This Whirlpool washer left loads soaking wet due to a stripped drive hub. We replaced the hub and restored spin; a transmission may be needed if it recurs.
The dryer had no heat due to a failed heating element. Replacing the element and a worn idler pulley restored proper heating and operation.
Dryer squeaked and rumbled due to worn support rollers and idler pulley. Installed Whirlpool kit with new rollers, idler, and belt to restore quiet operation.
The dryer ran but produced no heat due to an open igniter. Replacing the igniter restored proper heating.
Oven was dead due to a failed clock/control board. Replaced the control panel/board and restored normal operation.