Samsung Refrigerator Repair (Model RF25HMEDBSG) – North Canton, OH
The refrigerator was not keeping the top part cold, leading to condensation and frost buildup. The issue was resolved by replacing the evaporator fan and thermistor.
The refrigerator was not keeping the top part cold, leading to condensation and frost buildup. The issue was resolved by replacing the evaporator fan and thermistor.
The refrigerator was not cooling properly, and the oven required calibration. Adjustments were made to improve performance.
The washer stopped after the wash cycle due to a loose drive belt, which was tightened to prevent further issues.
The dishwasher was not getting water and was humming. The pressure switch was installed to resolve the issue.
The washer was not working, filled with water, and errored out. Replaced the shift actuator to restore functionality.
The refrigerator was failing to keep milk cold, leading to spoilage. Replacing the evaporator fan resolved the issue.
The washer was not filling with water, but otherwise cycled fine. The temperature selector switch was replaced to resolve the issue.
A Samsung dryer in North Canton, OH was making a loud noise when the customer hit start to begin the cycle. The homeowner suspected the belt had snapped, but the unit would power on without starting. Our diagnosis revealed a failed idler pulley — a common issue with Samsung dryers. The Problem When the customer … Read more
A Maytag washer in Canton, OH was filling with water but wouldn’t spin or agitate to wash the clothing. Our diagnosis revealed a broken wire on the motor that was preventing the wash action from engaging. The Problem The washer would start and fill with water normally, but it would not spin and actually wash … Read more
A Maytag Neptune dryer in Atwater hadn’t been heating for almost a year when we got the call. The customer had been dealing with cold air cycles, leaving clothes damp after full run times. Our diagnosis revealed a failed thermistor and faulty coil valves preventing the gas burner from igniting. The Problem The dryer wasn’t … Read more