Whirlpool Washer Repair (Model WTW8800YC1) – Canton, OH
The washing machine was making excessive noise during the spin cycle, indicating a potential bearing issue. New bearings and a seal were installed to resolve the problem.
The washing machine was making excessive noise during the spin cycle, indicating a potential bearing issue. New bearings and a seal were installed to resolve the problem.
The dishwasher wouldn’t start, but after replacing the control board, it is now functioning properly.
The refrigerator was not cooling properly, and the issue was resolved by installing a new overload relay on the compressor.
The dishwasher was not washing properly, leaving the detergent pod unused. A gasket replacement resolved the issue.
The oven door wouldn’t lock after a cleaning attempt, but unplugging the unit resolved the issue.
The dryer was making a speaking and grinding sound intermittently, which was resolved by replacing the idler pulley assembly.
The washer’s spin cycle was failing, leaving laundry sopping wet. Replacing the hub resolved the issue.
The refrigerator was not cooling while the freezer was functioning. Replacing the fresh food evaporator fan resolved the issue.
The dryer was making unusual noises due to a faulty pulley and belt, which were replaced to restore functionality.
The dryer was spinning and pushing air but not heating up. We replaced the heating element assembly and idler pulley to restore functionality.