KitchenAid Dishwasher Repair (Model KDTE334DSS0) – Minerva, OH
The dishwasher was stuck in the wash cycle and wouldn’t advance. A new sensor was installed to resolve the issue.
The dishwasher was stuck in the wash cycle and wouldn’t advance. A new sensor was installed to resolve the issue.
The washer was leaking from underneath but still functioning. A corroded hose was shortened to address the issue.
The washer displayed an error code F6 E2, indicating a user interface issue. Cleaning and sealing the board resolved the problem.
The washer stopped before completing the wash cycle, but after replacing the bearing kit and shaft, it now runs smoothly.
Ice buildup on the vent was resolved by replacing the damper motor and adjusting the defrost timer.
The refrigerator was not keeping the top part cold, leading to condensation and frost buildup. The issue was resolved by replacing the evaporator fan and thermistor.
The refrigerator was not cooling properly, and the oven required calibration. Adjustments were made to improve performance.
The washer stopped after the wash cycle due to a loose drive belt, which was tightened to prevent further issues.
The dishwasher was not getting water and was humming. The pressure switch was installed to resolve the issue.
The washer was not working, filled with water, and errored out. Replaced the shift actuator to restore functionality.