Kenmore Washer Repair (Model 110.44832201) – Canton, OH
The washer was leaking water, which was fixed by replacing the door boot.
The washer was leaking water, which was fixed by replacing the door boot.
The washer had a broken lock and was spinning off center. Replacing the lid lock and hub resolved the issue.
The washer stopped draining due to a faulty pump. Replacing the drain pump restored its functionality.
The washer was very loud during the spin cycle, with squeaking and metal rubbing sounds. Replacing the tub bearings and mode shifter assembly resolved the issue.
The washer’s spin cycle was failing, leaving clothes heavy with water. A loose drive belt was replaced to restore proper function.
The washer displayed an OE error and failed to drain, preventing it from completing cycles. The water pump was replaced to resolve the issue.
A Maytag washer on Greenfield Avenue in Canton was leaking water. Our initial inspection revealed this was a warranty issue — we had previously replaced the door gasket in August 2018, and it was failing again under warranty coverage. The Problem The customer reported their Maytag washer was leaking water. This was the same unit … Read more
We recently completed a washer repair in Salem, OH for a customer whose Admiral washer was leaking water and would not drain. The bearings and seal on the drain pump had gone bad, causing water to leak out of the bottom of the washing machine, and by the time we arrived, the pump had locked … Read more
A service call in Alliance brought us to a Kenmore washer with quarters stuck in the coin mechanism. What started as a simple coin jam turned into a lock replacement when we discovered the root cause during our diagnostic process. The Problem The customer reported that their washer had quarters stuck in the wash machine. … Read more
We responded to a service call in Carrollton for an Admiral washer that stays in wash. The 15-year-old unit had developed multiple critical failures that made repair uneconomical. The Problem The customer reported that their Admiral washer stays in wash. The machine would not advance through its normal cycle sequence, remaining stuck in the wash … Read more