Samsung Dryer Repair (Model DV48H7400EW/A2) – North Canton, OH
Dryer ran and heated but made belt-slip noise. Failed idler pulley replaced and tested; unit operates quietly and normally.
Dryer ran and heated but made belt-slip noise. Failed idler pulley replaced and tested; unit operates quietly and normally.
The refrigerator’s water line was leaking. We cut out the damaged section and spliced new tubing to stop the leak.
Whirlpool washer WFW70HEBW0 was taking too long to finish. Cleared a clean-cycle error and secured a loose pressure hose rubbing the rotor to restore normal cycles.
The large burner on this GE range was heating poorly. Testing found the burner thermostat open; replacing the burner restored full, even heat.
Washer went out of balance during spin. We found weak shocks and a worn drive hub; recommended shock kit and hub replacement, but customer chose a new unit.
The dryer developed loud tumbling noises from a frayed belt, worn idler/rollers, and a rock in the glides. Replacing those parts and clearing debris restored quiet operation.
A Whirlpool dishwasher filled but never washed. Diagnosis confirmed a failed circulation pump; replacing the wash pump restores normal cleaning.
The stove would not power up or feed pellets due to a failed control potentiometer interface. We installed a new control board and cleared an auger jam, restoring normal operation.
Broiler appeared inoperative. Verified normal operation and showed correct broil settings; no parts needed.
Plugged into 220V, this refrigerator would not power on. Diagnosis found a fried inverter board; advised inverter board replacement under warranty.