Samsung Washer Repair (Model WA50M7450AP/A4) – Canton, OH
The washer stopped working mid-cycle and wouldn’t spin or drain. A sock was found stuck in the drain pump, which burnt it out and required replacement.
The washer stopped working mid-cycle and wouldn’t spin or drain. A sock was found stuck in the drain pump, which burnt it out and required replacement.
The refrigerator side was failing, causing food loss, but the damper assembly was replaced to restore functionality.
The oven was not heating to the selected temperature. Replacing the bake element resolved the issue.
The dryer turned on and tumbled but produced no heat. Replacing the heating element resolved the issue.
The oven was not heating properly, but after replacing the main control board, it is now functioning correctly.
The washer was leaking water, which was fixed by replacing the door boot.
The dryer was making noise and then wouldn’t start. The motor was overheating, leading to a replacement of the motor and heating element.
The ice maker stopped working due to a likely solenoid issue, but after installing a customer-supplied ice maker, it now cycles properly.
The oven was not heating, but the broiler and burners were functional. Replacing the oven igniter resolved the issue.
The washer had a broken lock and was spinning off center. Replacing the lid lock and hub resolved the issue.