Admiral Refrigerator Repair (Model FRS26LF8CS3) – Canton, OH
The ice maker stopped working due to a potential solenoid issue, but was fixed by installing a customer-supplied ice maker.
The ice maker stopped working due to a potential solenoid issue, but was fixed by installing a customer-supplied ice maker.
The refrigerator wasn’t cooling properly, but after replacing the evaporator and condenser fans, it returned to optimal function.
The refrigerator was not cooling in either cabinet, but after replacing the main control and compressor inverter board, it now operates normally.
The washer wouldn’t complete its cycle due to a locked drain pump. After replacing the drain pump and drive belt, it is now running smoothly.
The refrigerator was leaking from the bottom, which was resolved by cleaning out the ice and dirt from the drain hose.
The top shelf of the dishwasher was not receiving water, which was resolved by clearing a plugged pump intake and running a clean cycle.
The washer failed to fill with water due to a drain hose issue and an inlet thermistor error. Both problems were resolved during the repair.
The ice dispenser was clogged with ice and frost, preventing it from dispensing ice. The issue was resolved by clearing the blockage.
The refrigerator was not cooling properly, with an inside temperature reading of 59 degrees. The evaporator fan was replaced to restore functionality.
The refrigerator was not cooling while the freezer was functioning. Replacing the evaporator fan motor resolved the issue.