Frigidaire Dishwasher Repair (Model LFBD2409LF3C) – Louisville, OH
Dishwasher wouldn’t drain after a cycle due to glass obstructing the drain hose. Clearing the hose restored normal draining.
dishwasher
KitchenAid Dishwasher Repair (Model KUDK03CTSS3) – Louisville, OH
Intermittent leaking from the dishwasher door was traced to worn seals. Replacing the door gasket and bottom door seal stopped the leaks.
KitchenAid Dishwasher Repair (Model KDTE234GPS0) – Alliance, OH
The dishwasher wouldn’t drain and left debris on dishes. Clearing debris from the drain pump and cleaning the lower spray arm restored proper washing and drainage.
Samsung Dishwasher Repair (Model DW7933LRASR/AA) – Alliance, OH
Heavy and Smart Auto lights were flashing due to an obstruction in the case brake water level sensor. Clearing the sensor and sump hose restored normal operation.
Samsung Dishwasher Repair (Model DW7933LRASR/AA) – Alliance, OH
The Samsung dishwasher showed flashing Heavy and Smart Auto lights due to a blockage in the case brake water level sensor assembly. Clearing the case brake and sump hose restored normal operation.
Whirlpool Dishwasher Repair (Model WDT970SAHV0) – Alliance, OH
The Whirlpool dishwasher was not cleaning due to a clogged middle spray arm. We cleared the blockage and restored proper spray and wash performance.
GE Dishwasher Repair (Model GDT695SMJOES) – North Canton, OH
The GE dishwasher wouldn’t start and the lock light flashed. A tripped CSM safety module was reset and the filter, float sensor, and sump were cleaned.
Amana Dishwasher Repair (Model ADB1500AWB) – Canton, OH
Broken door latch kept this Amana dishwasher in Canton from closing and starting. Replaced the latch assembly and restored normal operation.
Maytag Dishwasher Repair (Model MDB4949SDZ0) – Canton, OH
Dishwasher wouldn’t fill, leaving cycles stalled. Replaced the main control board to restore proper water fill and operation.
Whirlpool Dishwasher Repair (Model WDT710PAYM5) – Salem, OH
Dishwasher didn’t spray from the mid or top arms and made a grinding/humming noise. Replacing the wash pump restored full spray and normal sound.