A Frigidaire dishwasher on Brussel Road NE in Carrollton, Ohio wasn’t heating to dry dishes at the end of the cycle. When we opened it up, we found the heater connection had burnt off and needed a complete heater replacement plus harness repair. The Problem The dishwasher is not heating to dry the dishes at … Read more
We responded to a service call on Oregon Avenue in Louisville, OH for an AMC dishwasher that was not running. Upon inspection, we discovered this was an eco dishwasher with no model or serial tag, likely a scrapped unit with limited parts availability. The Problem The customer reported their AMC dishwasher was not running. The … Read more
A Canton homeowner called about their KitchenAid dishwasher that wasn’t responding when the door closed. The unit wouldn’t drain, wash, or show proper internal lighting when the door was shut. We discovered a faulty door latch that wasn’t signaling the dishwasher to start its cycle. The Problem The customer reported that closing the door does … Read more
The Samsung dishwasher showed flashing Heavy and Smart Auto lights due to a blockage in the case brake water level sensor assembly. Clearing the case brake and sump hose restored normal operation.
The Whirlpool dishwasher was not cleaning due to a clogged middle spray arm. We cleared the blockage and restored proper spray and wash performance.
A Louisville homeowner called us about their Whirlpool dishwasher that had standing water in it and would not wash well. When they pressed the cancel button it would not drain. Our diagnosis revealed multiple component failures that were preventing proper operation. The Problem The customer reported that their dishwasher had standing water in it and … Read more
We responded to a service call on Brussel Road NE in Carrollton, OH for a GE dishwasher with door problems. The customer reported that the dishwasher door came apart after either a hinge broke on the left side or possibly the cord. Our diagnosis revealed this would need significant door assembly repair work. The Problem … Read more
We completed a dishwasher repair on Locke Avenue Southwest in Massillon, OH for a customer dealing with a leaking Admiral dishwasher. Our diagnosis revealed failed seals on the door assembly that were allowing water to escape during wash cycles. The Problem The customer reported their Admiral dishwasher was leaking. Water was escaping from the unit … Read more
The GE dishwasher wouldn’t start and the lock light flashed. A tripped CSM safety module was reset and the filter, float sensor, and sump were cleaned.
A Frigidaire dishwasher in Massillon was turning on but wouldn’t complete a cycle. The unit was displaying an i20 error code, which led us to discover a faulty water pressure sensor that required replacement following Frigidaire’s service bulletin. The Problem The customer reported that their dishwasher turns on but will not complete a cycle. The … Read more