Kenmore Dishwasher Repair (Model 66512783K310) – North Canton, OH
The dishwasher was stuck in the rinse cycle and wouldn’t drain, requiring a manual shut-off. A new inverter and fan vent were installed to resolve the issue.
The dishwasher was stuck in the rinse cycle and wouldn’t drain, requiring a manual shut-off. A new inverter and fan vent were installed to resolve the issue.
The washer drum was uneven and clunking, caused by a spring that had unhooked. The issue was resolved by reattaching the spring.
The dryer wouldn’t start due to a failed high limit thermal fuse. After replacement, it now heats and operates correctly.
The dryer wouldn’t start, but after replacing the thermal fuse and heating element, it now functions properly.
The washer stopped mid-cycle, but after replacing the door switch, it is now running smoothly.
The washer was stuck in a cycle full of water with the door locked. Replacing the drain pump resolved the issue.
The washer was leaking water, which was fixed by replacing the door boot.
The refrigerator stopped cooling and was defrosting, causing water to leak from the front. Replacing the starter relay fixed the issue.
A North Canton customer called about their Kenmore dryer running but producing no heat. We diagnosed a failed thermal fuse and restored normal operation with a quick replacement. The Problem The customer reported that their dryer works but no heat was being produced. The unit would run through cycles normally, but clothes remained damp and … Read more
A service call in Alliance brought us to a Kenmore washer with quarters stuck in the coin mechanism. What started as a simple coin jam turned into a lock replacement when we discovered the root cause during our diagnostic process. The Problem The customer reported that their washer had quarters stuck in the wash machine. … Read more